Popular Posts

Editor'S Choice - 2020

Sneakers lacing

With the help of seemingly insignificant details, you can create competent accents in the image. If a man responsibly approaches his appearance and condition of shoes, for sure, he will be interested in how you can beautifully tie shoelaces on classic, sports and seasonal shoes. And stylists, in turn, offer several interesting ideas on how to lace up shoes, sneakers or sneakers.

For many modern men, the factory version of lace weaving with a butterfly has already become something boring and mediocre. Another thing is new and creative options, thanks to which you can be distinguished by exquisite taste and originality. This issue is especially relevant now, when men have at their disposal multi-colored shoelaces of all kinds of fabrics that are selected according to the general style and image.

Ways and options for lacing. How to lace up sneakers and gym shoes correctly?

The standard method is used by us regularly. At the same time, the shoes fit well enough to the foot and allow you to move freely. This method is the most popular in the world, and it is used not only for lacing sneakers and sneakers, but also a shoe - this is a zigzag lacing. It is carried out simply, and the lace crosses among themselves along the entire length of the shoes that you lace up.

This lacing has gained a lot of fans due to its simplicity and convenience. Indeed, even children can handle this method of tying shoes.

Special or professional lacing is used by athletes, dancers. This type of lacing is needed primarily for safety. The purpose of such lacing is to tighten the shoes on the foot very tightly. And the knot is hidden inside, so that during exercise, the free ends of the laces do not interfere and do not cause injury.

Beautiful lacing. Types of lacing sneakers with 4, 5, 6, 7 holes

A decorative way of lacing sneakers and sneakers allows you to decorate the simplest shoes. This method, of course, will take more time and effort, but it's worth it, because here everything is limited only by your imagination.

Let's look at lacing options from simple to more complex.

This option can be called "European." This type of lacing is very popular in European countries and is used as often as zigzag. It is worth noting that the European lacing is simple and does not require a lot of time.

Another option is a simple straight lacing.

Note : Suitable for shoes with an even number of pairs of holes. It is quite difficult to align the ponytails of the laces to tie them, but the lacing looks very neat.

A bow tie is a fairly simple way (associated with a bow-tie).

Note: if the boot has an odd number of pairs of eyelets, then first make a straight stitch on the top, if even - on the bottom. Crosses-butterflies can be done on those areas of the boot that need to be pulled down and skipped where it is necessary to relax the shoes. You can use relatively short shoelaces.

Lacing - the railway. This lacing method is only suitable for thin or flat shoelaces, because the shoelaces go through the same holes twice. That is why the lacing is very durable, but it is difficult to tighten, which causes certain difficulties.

Note: Of the minuses, very long shoelaces and a lot of patience are needed.

Saw - this method of lacing is very interesting. To lace up your shoes in a sawtooth fashion in stages, follow the instructions:

Note: About Take note that the tilt of the lacing can be done in any direction. You can lace up shoes in this way according to the mirror principle. Of the minuses: it is difficult to align the length of the laces.And it is better to use such a lacing for shoes with 5 holes (eyelets).

Parallel is also a fairly simple way. Do not need long shoelaces. There are two types of lacing. The first view is a bow outside.

The second type is a bow inside the shoe (a hidden knot). This is almost the same as lacing a little higher, the difference is only in the position of the knot and bow.

Double lacing. A very complex weaving process, but rightfully one of the most beautiful. Long shoelaces will be needed.

Note: This type of lacing is suitable for an even number of eyelets (4, 6, 8).

  1. The lace is passed into the upper penultimate eyelets from the outside and displayed inside the shoe.
  2. One end of the lace is wound down from the outside into the shoe, while passing through one eyelet.
  3. The other end of the lace is drawn over the right lace and also wound from the outside into the shoe, letting in one grommet.
  4. Both ends are brought out from the outside of the shoe inside, with one end of the lace running over the other.
  5. We draw the left end of the lace under the right and bring it from the opposite side to the lower free eyelet, from the inside of the shoe to the outside.
  6. Then we stretch the right end of the lace under all the laces and also put it in the opposite eyelet.
  7. We pass the right lace over and under previously woven laces from the inside of the shoe to the outside (see photo).
  8. Same thing with the left drawstring.
  9. Skip both ends under the horizontal lace from the inside of the shoe to the outside and tie a bow.

Now let's move on to more complex and interesting ways of lacing.

Lacing without beginning and end. This is a real canvas - lacing is so dense that it feels like there are no laces on the shoe at all. You can use both one-color shoelaces and multi-colored ones - it will come out original (I use contrasting colors for the photo to make it clearer).

Note: This lacing is more suitable for odd holes in shoes.

And this is not all types of lacing that are described in the article. It all depends on the imagination, shoes and the purpose of the lacing itself. Try, experiment, inspire.

1. Lattice

This beautiful weave of laces is quite popular. It looks best on shoes with an average number of holes: from six to eight.

  1. Cross and insert outside into fourth.
  2. Pass the first end into the second hole from the inside on the same side, and then from the outside into the fifth hole on the other side.
  3. Insert the second end from the inside into the second hole on the same side, pass under the cord of the first cross and insert from the outside into the fifth hole on the other edge.
  4. Thread the first end into the third hole on the same side from the inside. Pass the lace over the first cross and under the second and insert into the sixth hole on the other side from the inside.
  5. Do the same with the second end.
  6. Tie a knot.

2. Web

The web looks amazing and does not lose shape. It is difficult to tighten this lacing. But if you do this, the shoes will be on foot.

  1. Insert the laces from the inside into the second holes.
  2. Outside, thread them into the first holes without changing sides.
  3. Cross and pass from the inside through the third holes. The cross should be on top of the first horizontal line of the laces.
  4. Insert under the first loops, cross and insert from the inside into the fourth holes. Each new cross should be above the previous one.
  5. Pass under the second loops and insert from the inside into the fifth holes on the other side, and then into the sixth in the same way.

6-hole lacing shoe

Six holes is the standard number of holes for sports shoes. It is this amount that allows you to correctly fix the leg, which is important when playing sports. There are about 4,000 lacing methods, and you can probably think of even more.

To diversify the lacing of your sneakers, use multi-colored laces or a decorative weaving method, which will be described later.

3. Straight lacing with short ends

Lacing with straight lines and without an internal zigzag. Suitable for shoes with an even number of holes, otherwise it looks messy.

Ideal for military, extreme sports and athletes. In the event of an injury, the straight lacing can be cut in a second and the foot can be removed from the shoe.

  1. Pass the laces through the bottom holes from the outside. One end should be much longer than the second.
  2. Insert the first end from the inside into the sixth hole without changing sides. This is where the work with him is finished. You should have a little tail, only to tie a knot later.
  3. Pass the other end from the inside into the fifth hole on the same side and from the outside into the fifth hole on the other.
  4. In the same way - first from the inside, without changing sides, and then from the outside to the opposite side - in turn, thread the end through the second, fourth and third holes.
  5. Pass the lace inside the sixth hole without changing sides and tie the knot.

Shape: Round and Flat

For classic shoes, choose thin waxed laces. Lush synthetic ones, as in the figure in the middle, are only suitable for sneakers and sneakers.

First of all, pay attention to the shape of the laces. If we are talking about classic shoes, it is customary to use two options: the popular round and the less common flat. The second ones look more original, so they have recently come into fashion. Flat shoelaces in terms of formality are higher than round ones, therefore they are more suitable for business and weekend shoes than for suburban ones. Even if your shoes are perforated (not through, of course, but in brog style), then with flat laces they will be appropriate in a business atmosphere.

4. Double multi-colored lacing

You will need two pairs of shoelaces. Choose contrasting colors and fairly short laces so that the bows are not very large.

  1. Insert the first shoelaces into the bottom holes from the inside.
  2. Cross and pass through the third holes from the inside.
  3. Repeat the first paragraphs with the second shoelaces, just insert them into the second holes, and after crossing them into the fourth.
  4. Cross the first shoelaces and thread them into the fifth holes from the inside.
  5. Do the same with the second, just insert them into the sixth holes.
  6. Now you have four ends, you can tie one creative knot from them or two ordinary ones.

5-hole sneaker lacing

Various methods are suitable for lacing 5 holes, for example, lacing-saw.

  1. Pass the lace through the bottom holes so that the ends are inside the shoe.
  2. Pull the right end of the lace through the hole above it, and pull the left end obliquely into the third hole from the bottom (the second hole is occupied by the right end).
  3. Draw both ends strictly horizontally to the holes on the left side of the boot and repeat the steps.

4-hole sneaker lacing

Some sneakers and boots have just 4 holes on each side for lacing. Basically, these are summer shoes, which have lacing more for a decorative purpose.

There are several lacing options for you:

Nike Sneakers Lacing

Nike annually presents many different sneaker options for any occasion. A distinctive feature of these sneakers is wide laces and the letter N or a tick on the side. You can use any of the described methods for lacing these sneakers.

If you don’t like the bow that completes the lacing, you can hide it under the tongue of sneakers or use the surgical unit:

  • Make a loop at the end of the right lace.

  • Pass the left string into the loop, but do not tighten.

  • Into the hole between the working end of the right lace and the loop, draw the end of the left lace to make 2 similar loops.

  • Now tighten the knot tighter.

Sneakers without lacing

Sneakers without lacing can belong to the category of sports slippers, which are common among people involved in water sports. Slip-on sneakers are another option without lacing. The popularity of this simple shoe has been growing for several seasons.The sports “mood” of such sneakers is obvious and at the same time they are perfectly combined with everyday and even elegant clothes.

Slip-ons sit on the foot due to rubber inserts on the sides and perfectly support the foot.

Sneaker Lacing Pattern

There are a lot of lacing patterns, different intersections and colors are used. For example, a decorative lacing called the World Wide Web:

  1. Thread the lace into the penultimate (starting from the bottom) pair of holes, so that the ends of the laces are inside the shoe. The lacing will advance first to the bottom, to the toe, and then rise back.
  2. Pull the left end of the lace obliquely and thread it into the hole on the right side, which is located one division from the first horizontal section.
  3. The next step - you need to again stretch the lace obliquely, skipping the nearest division. If you have 6 holes in the shoe, then you should get into the hole closest to the toe.
  4. Pull the end of the lace vertically into the next hole located above it and repeat 2 crosshairs again, as a result, the left lace should go into the hole farthest from the sock on the left side of the shoe.
  5. Repeat all the same actions with the right end, only reflect them in a mirror.

For those who are not afraid of difficulties and eager to stand out from the crowd, there are several more schemes that show the sequence of lacing. It may not work out the first time, but the main thing is not to despair, having gradually mastered various techniques, you can quickly and easily combine them and come up with something of your own.

Lace-up sneakers without tying

The notion of modern designers allows you not to bother at all with tying shoelaces using elastic elastic bands. This small device is an elastic band (or silicone cord) with a length of about 3-4 centimeters, at the ends of which blocks are fixed. You can create any picture using such a simple device, as well as combine several colors.

The original lacing of sneakers is a simple and affordable way to add a twist to your look. experiment, change, stay stylish and fashionable!

Video: Beautiful lacing sneakers

In early childhood, we all learned to lace up shoes. Laces are used not only as support for shoes, but also to give creativity to the image. Fashion trends do not stand still, and there are more and more ways to lace up sneakers.

So, consider the most common options:

  • Zigzag lacing. About this species we can say - "easy and simple." We begin to thread from below. When it goes through all the holes, you should see the lace crossing.
  • Tangled track. Very elegant, but not very convenient method. The lace is threaded into the upper hole, and then zigzag into the three lower ones, and in the opposite direction. You need to monitor the ends of the lace, otherwise they can be lost.

  • Display. Lacing consists in the fact that by pulling the lace, we do a zigzag from below, bypassing one row of holes. Then, reaching the end, fills in the missing rows.

Display is a popular shoe lacing option
  • Lightning. This is a pretty complicated method, but many mods use it. There are no horizontal sections.

  • Ladder. This option is popular among European fashionistas. We start from the bottom holes. Then one end must be led out through the upper hole, and the other should be led out higher through one hole crosswise.

Short flight of stairs - an easy way to lace up sneakers
  • Hidden node. The technique is quite simple. Pass the two ends of the lace, as always, through the lower holes. You need to make one end shorter in advance. Passing the lace, the nodules are not visible, but the laces form horizontal lines.

  • Reverse circuit. To get this option carefully, we first weave the lace on one side of the holes, and then on the other. This type is a great alternative to classic lacing.

Idea for lacing running shoes - reverse chain
  • Lattice. It has undoubted popularity among young people. The bottom line is that the laces are twisted, forming a lattice pattern. It will be more interesting if you take two colors of laces. This method requires training and skill.


Direct option relevant and concise. Differs in simplicity of performance. First, lace is threaded into the lower holes, but the ends are left inside the sneakers. The right ends fit into the right holes, and the left ends into the left. We push through until one end is in the upper hole.

Cross way. Two subspecies are considered here - the simple and the reverse. It is necessary to skip the ends of the lace into the lower holes from the inside (or outside). Then the ends cross and pass from the inside out (or from outside to inside) into adjacent holes. All manipulations are carried out to the upper holes.

Nodules - This is a very interesting method. We start from the bottom holes, bringing the lace out. Each stitch is fixed with a knot. The ends on different sides are placed under the hole and brought out. So continue to the top hole.

With 6, 7 holes

Such a number of holes is mainly found among sports shoes. There are a lot of examples of lacing. Here you can safely give vent to imagination and create new methods of weaving.

On sneakers with 6 holes perform checkerboard lacing . Weaving with multi-colored laces will attract more attention. The method does not cause much complexity. For example, take the blue and red lace. Fasten the base of the blue lace with a knot, then pass through all the holes. Pass the red lace over and under the blue lace. It turns out a beautiful chess pattern.

Cross option Suitable for sneakers with 7 holes. To the last hole you need to run the lace diagonally. Then thread through the holes on both sides, doing this symmetrically. When properly laced, the ends will be in the middle.

Saw - type of lacing for 7 holes. A lace is threaded, as always, from below, but the ends should be inward. From the inside, one end of the lace is threaded into the upper hole, the lace should be on the outside. After that, they switch to the opposite hole. The other end of the lace is threaded obliquely. The manipulations are repeated until one end is in the uppermost hole.

Self-lacing sneakers

Most recently, shoe manufacturing companies introduced the latest technology - self-lacing shoe models. Modern shoes are made exclusively from quality materials.

The manufacturer claims that the lacing of the sneakers is automatic. For convenience, manual control is present in the shoes. It is carried out using the buttons that are on the sneakers. Buttons can weaken the lacing or, on the contrary, tighten it harder.

In the sneakers is a battery that gives backlight. These shoes can be recharged. On the inside of the sole there is an aluminum film with microscopic holes, and the lower side of the insole is covered with a copper film with nanowires. As a result of walking, the insole comes into contact with the inside of the sole, and as a result, an electric current is generated.

Self-lacing sneakers look spectacular, especially if it's backlit with color. They will undoubtedly fit into any image.

How to wear lace-up sneakers

Sports shoes today are an integral part of women's wardrobe. Along with, for example, bombers and, sneakers do not lose relevance. Created for sports and an active lifestyle, sneakers have long gone beyond the gyms.

Light gray lace-up sneakers for fall or spring, combined with short black trousers with a slim fit, an oversized knit coat in dark gray, above the knees and a gray knit scarf with a small knit.

Women's white and gray lace-up sneakers for a casual look are combined with ripped jeans of a light blue shade, skinny fit, a straight-cut beige sweater, a long thin scarf of gray-beige tone and a red bag with a long strap.

Fashionable sneakers with white lacing, flat soles in combination with an asymmetric knit dress in gray and beige colors, fitted cut, with long sleeves and a small cherry-colored handbag on a long strap.

Summer sneakers with lacing of violet-blue colors, on a white sole, combined with short jeans with scuffs, a white T-shirt with an abstract color pattern and a small leather handbag in a red tone on a long strap.

Stylish sneakers with black lacing with white accents in combination with a classic coat in light gray shade of midi length, black jeans of a narrower cut, a thin black sweater, a knitted black hat and a black leather clutch with a buckle.

High-top sneakers with lace-up in violet-blue colors on a flat white sole, complemented by Velcro, go with a short dress of pink-brown shade, fitted style, sleeveless, with a round neckline and a thin black scarf.

Stylish sneakers with white lacing on a flat sole for the summer are combined with a coral midi skirt, a straight cut, a white loose-fit blouse with short sleeves, a thin sleeveless gray-beige color with a small print and a large yellow clutch.

Autumn version of the sneakers with lacing and Velcro, white in combination with a classic coat in light brown, midi length, cropped classic gray trousers with arrows, a black blouse with a V-neck, a long scarf in black and white in a large checkered color and leather brown handbag in short handles.

Bright pink and white lace-up sneakers for casual look combine with skinny black jeans, a short coat in a dark gray shade of a straight cut, a thin blouse in black and a black leather handbag with a long chain strap.

The fashion trend in the new season is a combination of sneakers and. Sports shoes made of leather, suede, textile, gloss are welcome.

Sneakers with lacing are combined with jeans, tops, sweatshirts, dresses, shorts. In a word, they will approach everything. Do not be afraid to experiment, find your unique image.

Women's pink lacing sneakers with white accents are worn with skinny jeans in a light blue hue, a chiffon long blouse in a pale gray color of a free cut, with long sleeves and a blue denim backpack with wide handles.

Summer sneakers with black lace and floral print on a flat sole are complemented by a short sundress of black coloring of a direct silhouette, on wide straps, a fuchsia blouse without sleeves and a red-pink handbag on short handles.

High-top sneakers with green lacing, with rivets, on a flat sole are combined with narrow leopard-colored trousers, a sleeveless black blouse, fitted style and a small multi-colored backpack, with geometric prints and patch pockets.

Women's sneakers with lacing of gray shades, with leather inserts and stripes complement short jeans in light blue colors, a short top in black sleeveless tones and a ripped denim jacket in a loose style, white with a pattern and inscriptions.

Fashionable sneakers with beige lacing, with a patch and leather inserts in combination with classic silver trousers with arrows, shiny fabric, a shirt of light green color on thin straps and a long jacket in blue with a floral print.

Stylish sneakers with white lacing with black and orange accents are combined with tight black trousers, a carrot-colored sweatshirt with a pattern and inscriptions, and a knitted hat of gray-brown tone with a small pompom.

Summer sneakers with blue lacing for a casual look, combined with short denim shorts in a dark blue hue, a straight cut, a cropped white T-shirt with an inscription, a loose fit and a navy blue backpack with patch pockets.

Youth sneakers with a lacing of a light gray shade with a pink fringing are combined with trousers of a gray-pink color with an abstract print, narrowed cut, a gray T-shirt with a cartoon pattern and a small multi-colored backpack made of shiny material.

The tandem of athletic shoes and pleated skirt, bright coat, midi skirt looks interesting and extraordinary. The combination of sneakers and feminine things already ceases to amaze passers-by.

Every woman should have sneakers in her wardrobe. Such shoes are combined with many things, and makes the image slightly informal, which allows you to feel comfortable in any situation.

Women's sneakers with lacing of gray-white colors for spring or summer, combined with a short green skirt, a knitted sweater in a dark green shade of a free cut, a medium-black cardigan and a large black leather bag, with short handles.

How nice to tie shoelaces, depending on the shoe

When choosing methods and techniques for weaving laces on shoes, stylists advise paying attention to such an indicator as the style of the shoe itself and the general image of the man. For example, under sports shoes, those techniques that will look ridiculous and inappropriate on classic shoes are suitable. Yes, and for the demi-season and winter boots, specialists selected separate methods.

On boots

The first shoes to consider in the context of weaving laces are boots. When choosing a lacing option, a man must first of all take into account the general style and design of shoes, if the shoes are closer to the classics, it is worth choosing more traditional techniques, creative and bold lacing is allowed for shoes close to the sports style.

Most often, stylists advise for shoes to try several lacing options:

  1. Diagonal - In this way, you can lace up so that the laces do not untie all day. An additional bonus will be the original diagonal pattern, which is obtained from the lace. Stylists advise to weave both shoelaces on strict boots equally, on everyday and sports - to make a mirror reflection of weaving.
  2. Traditional way - in this case, it is assumed that the shoe is laced in a zigzag fashion, starting from the bottom holes, crossing the ends of the lace between each other, ending with the process to the last holes.
  3. Straight lacing - It looks very strict and presentable on winter boots in both classic and free style. Its feature is hidden lacing, after which only straight lines from the lace remain on top of the shoe.

If shoes with lashes are supposed, experts advise using round shoelaces that are resistant to friction, which means they will last much longer. To keep the loops and laces firmly without bends, it is better to use simple cross lacing. In this case, the lace edge is threaded into the lower loops of the shoe, and then distributed into two equal strips. Further, the edges are crossed, led into the following loops above and so on to the very top.

On shoes

It is especially worthwhile to choose ways to tie laces on classic shoes, since in most cases these shoes require matching the dress code. In addition, fewer holes are provided on shoes more often than on other types of men's shoes. Stylists are advised to consider several simple ways how to tie shoelaces on shoes, namely:

  1. Criss-cross - The traditional technique of weaving laces crosswise on classic shoes, but it is also allowed on other types of shoes.
  2. Diagonal - diagonal weaving of laces on shoes, suggesting the traditional weaving of laces, but in a diagonal direction.
  3. Over-under - the over-under technique, as a result of which the lacing alternates on top or inside the trousers of the shoe, which is appropriate on oxford shoes, for example.
  4. Straight bar - A direct way of weaving laces, thanks to which parallel lines of laces are created. At the same time, the shoes look easy and attractive, but on tight-fitting shoes, it may be difficult to tighten the laces.
  5. Vice versa - lacing in the style of maximalism (the second name is “military lacing”), in the course of this technique, a variant of straight, diagonal and rectangular weaving is used.
  6. Lattice - weaving the lace according to the lattice technique, as a result of which simple laces will look cool and original. And in order to learn how to tie shoelaces using this technique, you need to have shoes with 6 holes.

To look stylish and original, it is enough for a man to practice with the above options for lacing shoes. Particular attention should be paid to the color and texture of the laces, so that these criteria fit into the overall image of a man.

On sneakers and sneakers

It is not always appropriate to tie a shoelace with a bow if a man prefers athletic shoes. Therefore, it is worthwhile to separately consider the advice of specialists on how to tie shoelaces on sneakers and sneakers in order to look fashionable and original. For this style of shoe, several lacing options are suitable:

  • Zigzag lacing - the laces are threaded into the lower holes, cross the edges, leading them to the next pair of holes above.
  • Ladder - first, the drawn laces are pulled outward, then one edge crosses into the upper hole, and the second edge is drawn one hole higher. By this principle, alternating lacing continues.
  • Outer lacing - from the inside, the lace crosses, passes through two holes, both edges are brought out and crossed again, then go inside and again repeat the whole principle of weaving.
  • Straight lacing - one edge is drawn from the inner side of the upper hole, extending to the opposite side. Next, one hole is passed through the edge of the lace above it, and the second end is drawn through the same holes through the same principle.

How to tie shoelaces so as not to untie?

On how to tie shoelaces without a bow and so as not to untie, experts are ready to share tips. The most reliable way is a surgical unit, which will allow a man to forget about his shoelaces for a long time. The surgical node is performed as follows:

  1. Laces are tied around the perimeter of the shoe in the usual way.
  2. Next, a knot is made of them at the end, wrapping for each other.
  3. On the right lace you need to form a loop that will look in the left direction.
  4. Now inside this loop stretch the second edge of the lace, form another loop so that its end also goes to the left. This will make parallel two loops.
  5. At the end of these two loops tighten a strong knot, stretching the edges of the laces in different directions.

By this principle, a rather dense and clearly fixed knot is obtained, which simply will not untie itself.

How to fasten shoelaces?

Another skill that is relevant today is the ability to quickly tie shoelaces to save time and effort. To get a fast knot, a man needs to perform the following manipulations:

  • laces lace up according to the usual method, tighten along the length and circumference of the leg,
  • laces are laid on the palms so that both ends look in opposite directions,
  • after that, with the ring fingers, middle fingers and little fingers, two loops should be formed, after which the lace is located on top of the thumb and forefinger,
  • the loops overlap each other, make a revolution like a sea knot,
  • after which the loops on the right and left sides are pulled in opposite to themselves sides.

A butterfly from a lace is not always appropriate, especially if it is long shoelaces that will form an excessively large knot. In this case, experts advise to lace the edges of the laces into the shoe holes in a mirror image, and then stretch the lacing along the entire length from the inside.

The main methods of lacing shoes

Typically, the store presents shoes in which the lacing is already performed by the manufacturer. Most often, it plays a decorative role. And it is aimed at making men’s and women’s shoes look more attractive and could be easily worn by the buyer. But such options are not always practical in everyday life.


reference . Suitable for shoes with 3 to 6 holes on each side.

She is the standard of official style, perfect for a formal meeting or a business dinner.

  • First row lace is inserted on top .
  • Then one half is brought out from the bottom into the last hole on the same side as the second part performs a zigzag pattern .
  • This figure begins in a hidden way and is threaded one hole above, then transferred to the second part of the boot from above in a parallel hole.

Cropped Knot

In this case, he will be hidden between the last and penultimate pass . The lacing itself will resemble a parallel method.

First of all, one part should be left shorter than the second. Then proceed to lacing the long end in a parallel way to the very edge. Wherein both parts must meet inside the boot , then they are tied into a knot.

The main disadvantage is that they will have to be worn as slip-ons without untying .

Cross over

It consists of a sequence of crosses that alternate above and below the tongue.

It looks interesting on classic models (oxford, derby) .

The lace is in the front row, the ends are the same size. Then they intersect and pass into the holes located above. Further, the ends intersect already inside the boot and are displayed upstairs. This pattern should be repeated to the very top.

Colors: Bright and restrained

Colored shoelaces should rhyme with one of the elements of your clothes - for example, with socks.

Most finished shoes go on sale with matching laces. This is the safest option, which is good for any style. But nothing prevents you from adding unusual color laces to the image as an accent. Here are some tips on how to choose this color:

  • Under the color of socks. A win-win option in which it is better that the socks are plain or in a formal pattern. Something more noticeable will overload the look.
  • Under the secondary tone of the shoe. This requires clarification: if your shoes are complex in color (for example, black-burgundy), then it will suit both the main shoelaces (black) for a strict bow and the secondary (burgundy) for a more cheerful one.
  • Under one of the details of the suit. The most convenient options here are the color of the strip or the cage on the jacket, the color of the tie, one of the colors of the pocket square. Just remember that the shoes in the wardrobe are usually smaller than the ties. So there will be disproportionately less profitable combos than with laces under the fabric of the suit.

Lacing: Formal and Casual

4 ways to tie shoelaces on shoes, from left to right: straight, with a trimmed knot, herringbone, cruciform.

The traditional lacing of men's classic shoes is straight, parallel. This is suitable for any situation, including the reception of the Queen of England, as it is the standard of formality.A more complex and not the most convenient, but in its own way aesthetic option is cropped laces with a knot hidden between the first and second hole. Shoes with this are worn exclusively as slip-ons, without untying, so think before you decide on it.

5. Wide crosses

This lacing is difficult to tighten or loosen, so don’t be so lacing your shoes if you have to take off your shoes often. But it looks very original.

  1. Cross and pass from the inside to the fourth.
  2. Cross again and insert into the third holes from the outside.
  3. Draw the ends under all the shoelaces, throw them crosswise and thread them into the sixth holes from the inside.
  4. Tie a knot.

6. Hexagram

The lacing is pretty loose: you won't be able to tighten it tightly. But it looks super-original - you are unlikely to see this on the street.

  1. Insert the laces into the first holes outside.
  2. Cross and insert into the fourth holes from the outside.
  3. Insert the laces into the third holes on the same side from the inside.
  4. Draw the first end over one edge of the first cross, and then under the second and insert into the third hole on the other side from the outside.
  5. Pass the first end through the fourth hole from the inside, then into the opposite fourth from the outside and into the third hole on the same side from the inside. Now both ends of the laces hang from the third row of holes.
  6. Cross the ends. Draw the first end under the first cross and above the horizontal line and insert into the sixth hole from the inside. Slide the second over the first cross, under the horizontal line and over the second end, and insert into the sixth hole on the opposite edge.

7. Lacing with a pass

Relieves pressure from the leg and provides mobility of the ankle joint. This lacing is suitable for people with a high elevation of the legs, who have the upper part of the foot from long toes of shoes.

  1. Insert the laces into the first holes from the inside.
  2. Cross and pass into the second holes from the inside.
  3. Do the same with the third holes.
  4. Pass the laces into the fourth holes on the same side from the outside, then cross and thread into the fifth from the inside.
  5. Insert into the last holes as in the beginning: from the inside after crossing.

To make it even freer, you can skip two holes. Then instead of crossing in the fourth paragraph, you pass the laces from the inside into the holes on the same side and only then cross them again.

8. Lacing for hiking

Lacing evens out the pressure on your foot and ensures that nothing snaps into your laces because they are on the same side.

  1. Pass the laces into the bottom holes from the inside.
  2. Insert the first end into the second hole on the same side from the outside, then into the opposite second hole from the inside.
  3. Without changing sides, insert the first end into the fourth hole from the outside.
  4. Push the second end into the third hole on the same side from the outside and into the opposite third from the inside.
  5. Pass the first end to the other side from the inside, insert into the sixth hole on the same side and into the opposite sixth from the inside.
  6. Push the other end into the fifth hole from the outside and into the opposite fifth from the inside.
  7. Now the laces were on one side: in the fifth and sixth holes. Tie a knot.

You can tie in two ways:

  1. For hiking - with a knot on the inside so that the laces do not cling to the branches. The first end will be left on the left foot and right on the right.
  2. For cycling - with a knot on the outside so that the laces do not cling to the wheels. The first end is the right on the left foot and the left is on the right.

9. Staircase

Lacing is very stiff and reliable. Great for hiking boots and skates, but not easy to tighten.

  1. Pass the laces through the bottom holes from the inside.
  2. Push both ends from the outside into the second holes on the same side.
  3. Cross the laces from the inside, pry them under the first loops and insert them into the third holes from the outside.
  4. Cross the laces again from the inside, but this time the other end should be on top.
  5. Pull the laces under the second loops and insert them into the fourth holes from the outside.
  6. Continue lacing the same way to the end.

10. Lacing with knots

Due to the nodes, the lacing is easily tightened and holds tight.

  1. Insert the laces into the first holes from the inside.
  2. Tie a regular single knot and insert into the second holes from the inside.
  3. Continue lacing, knotting at each step.

11. European direct

This lacing is suitable for shoes whose edges converge almost flush. If there is a large gap between the edges, you will see not only the outer stripes, but also the inner zigzag.

Lacing is great for oxfords. Thanks to her, the edges of the shoes converge almost closely, do not frown and do not stick out.

  1. Pass the laces through the bottom holes from the outside.
  2. Insert the first end from the inside into the second hole on the other side and from the outside into the opposite second.
  3. Pass the second end in the same way through the third hole.
  4. Pass the first end in the same way into the fourth hole, and the second end into the fifth.
  5. Cross the ends and pass through the sixth holes from the inside.

12. Lightning

One end passes to the other side through the entire lacing and resembles a zipper - it looks. In this case, the lacing is very fast.

  1. Insert the laces into the first holes from the inside.
  2. Pass one end into the sixth hole on the other side.
  3. Push the second end from the outside into the second hole on the opposite edge, then through the third from the inside on the same side.
  4. Now insert the second end from the outside into the second hole on the other side, and then into the third from the inside on the same side.
  5. Continue lacing this way to the end until the second end passes through the sixth hole.
  6. Tie a knot.

13. Railway

If you have fairly long shoelaces and you want them to not untie, you can not tuck the ends, but bring them up under the edges of the shoe and tie them in a knot.

If you weren’t able to figure out any lacing, see the instructions on the Ian’s Shoelace Site. There you will find detailed step-by-step diagrams and many other interesting ways to lace up your shoes.

And you can find out why your shoelaces are untied, from this video.

Shoes with laces have one significant drawback - putting them on, you will have to spend a certain amount of time lacing each time. Nevertheless, there are interesting ways to do this in a short time and without extra effort. Consider the lacing options for a 4-hole sneaker.

How to lace up 4-hole sneakers nicely?

To lace up such shoes, you can use one of the classic options or connect imagination and imagination. Since our sneakers have an even number of holes on each side, almost all known options are suitable for them. In particular, the most popular 4-hole sneaker lacing methods are as follows:

  • cross-to-cross lacing - a method that we all get acquainted in childhood. It is suitable for sports shoes, as well as for classic shoes or boots with laces. To lace up your shoes in this way, pass the lace through the holes in the bottom row and pull both ends out. After that, pull one end through the next empty hole on the opposite side. Extend the other end in the same way. Continue to repeat these steps until the end so that you get a crosshair in several places,
  • diagonal method It is also popular with lovers of sports and classic. If you chose this method, pull the cord through one of the bottom holes, and then insert it from the top into the second. Move the part of the lace that runs from the inside to the next hole on the opposite side. The second side, which went into the inside of the boot, now needs to be pushed through the next opposite hole from the inside. Repeat the procedure until the end of the lacing,
  • very beautiful lacing "cross over" more suitable for sneakers with many holes, but can also be used for 4 holes. In order to create it, slide the cord from the outside inward through the lower holes. Next, cross the parts of the lace and pull them into the opposite holes. You will get a cross located at the bottom of the boot. Take this step again, after which you will form a large cross located above the previous one. In the same way, make another “invisible” cross, after which the lacing will end,
  • among all types of lacing, a 4-hole sneaker is the brightest straight horizontal . You need to start it the same way as in the previous case. Next, take the left part of the lace and push it from the inside out into the next hole on the same side. Insert the right lace, in turn, into that hole on the same side, which is located one from the one used. Pull the left part of the lace into a parallel hole from top to bottom. In the next step, repeat the action with the right side of the lace. Continue lacing to the very end. If you did everything correctly, the lacing will take the form of strictly parallel lines.

Often when buying sports shoes, when we wear them later, we repeatedly think about how to lace up our sneakers beautifully. And often it’s not even a matter of beauty, but of the convenience or features of the foot of the person who intends to wear them.

Why are sneakers needed?

The main purpose of this type of shoe is directly concentrated in its definition.

After all, sneakers are usually referred to as sports shoes. Many athletes prefer to wear only theirs for training and their performances. And modern youth, as well as children and their parents have long appreciated the convenience of sneakers and always have this look in their shoe arsenal. It is important to know that the comfort when wearing sneakers largely depends not only on the shape, the material from which they are sewn, the quality of tailoring, but also on the lacing. It would seem that this aspect should be in the very last place, but most experienced athletes know that it is possible to remove excess load from the foot precisely thanks to him.

Why is lacing on sneakers necessary?

I would like to note for very curious people that there are various ways of lacing sneakers, and there are already more than 43 thousand of them. Their final calculation is conducted by Australian Jan Figgen, who collects these methods. But in his book it is noted that in this case we are talking specifically about those sneakers that have 6 standard holes for lacing. Recently, orthopedists and doctors around the world have argued that it’s individually tailored methods for lacing sneakers that can correct the wrong gait and make it more convenient for the owner of sports shoes. At the same time, trainers in all kinds of sports are tired of repeating one simple truth - well-laced sneakers will not only make their activities easier for athletes, but will certainly lead to a long-awaited victory. For example, those involved in the triathlon, need a kind of lacing that will instantly tighten or relax the shoes, which will save the right amount of time. Or cyclists are advised to leave the laces on one side of the sneakers, as they do not interfere with them when riding.

Standard Types of Lacing Sneakers

We all know how to tie shoelaces, but rarely does any of us think about this process, usually everything happens automatically. How beautiful it is to lace up the sneakers so that the shoes do not look noticeable, but usually, and walking in it was quite convenient. These options include the following:

Atypical shoe lacing

Usually it is used on youth versions of sports shoes, while two colors of laces are used. The process itself is very time-consuming, but the result looks amazing.How to lace up sneakers in an original way, some of the options presented below will tell you, but remember that there are a great many of them, and this is just a small part:

  1. Lacing in the form of a cage - as an option, is used by young people when it is necessary that the inscription in the language of the sneakers is most noticeable. It is easy, but difficult to tighten: the laces are threaded into the upper holes on both sides, then two holes are passed, the laces cross and pass into the third holes. They are threaded from the inside back to one hole, go up, and the procedure is repeated.
  2. Spider web lacing: looks very nice, leaves short shoelaces at the end. The meaning is as follows: the laces are threaded into the upper holes on both sides, then two holes are skipped, crossed and exit into the third holes. Then the laces from the inside go back into two holes. So the procedure is repeated one more time, and the laces are displayed in the last holes.
  3. Lacing in the form of a back loop: the plus is the beauty, and the minuses are the wear of the laces and the fact that the whole lacing eventually shifts to one side. Laces are threaded into the upper holes from two ends, then rise upward in a spiral, while intertwining with each other.

Correct lacing of sneakers

How to lace up the laces on sneakers so that after a long walk you feel good, and the process of movement itself brought only benefit and joy? Of course, the answer to this question is purely individual. After all, it all depends on whether there are painful fate on the legs, whether the heel is sagging, whether the foot hurts. In this case, it will be best to contact an experienced trainer or a competent doctor who can tell you the most comfortable ways to lace up your trainers specifically for you.

Beautiful ways to lace up sneakers

Let's not forget that this type of shoe has recently been very popular. And it became fashionable to wear them not only with sportswear, but also with dresses, trousers, long and short skirts and many other clothing options. Therefore, the question of how to beautifully lace up sneakers has become very relevant. Of course, the standards of beauty for everyone are quite different, but neat and simple ways to lace up sneakers will always remain in fashion:

  1. The lacing is straight. The meaning is this: one string is immediately threaded into the very last hole and is not involved in the process, and the other is passed along the bottom and goes outside, and so on to the very end. As a result, straight parallel lines should form on top.
  2. Lacing in two colors. The secret is simple: two colors of laces are used, while they are cut almost in half and glued together. And then the direct lacing method is used. Only the resulting knot at the junction of two shoelaces can press on the little finger while walking.
  3. Lacing the ladder: the laces are threaded into the upper holes, then into the next holes, cross and pass under a vertically arranged lacing of the opposite end, then the procedure is repeated. Very neat and beautiful.

Lacing according to the foot: wide or narrow

How nice to lace up sneakers, but feel comfortable and enjoy doing your favorite sports? Doctors and trainers distinguish two types of feet and, depending on this, give some tips for lacing your sports shoes:

  • With a narrow foot: try to choose sneakers in which the holes for lacing are not located directly opposite each other, but a little diagonally. And use for tying those holes that are away from the tongue.
  • With a wide foot: use the same advice, only use the closer holes for lacing. When tying, do not cross the laces along the entire length; skip some of them in a straight line to the next hole.

For sports shoes

Lacing specially designed for active work . In her the knot is not tied at the beginning or end of the boot, but in the middle .

  • The first row is not tied up standardly, but runs diagonally between the first and last hole.
  • From both ends, the lacing is zigzag (first diagonally, then straight).
  • Both ends meet in the middle, where a knot without a bow is tied

6 ways to tie shoelaces

As I already mentioned, the most popular way of lacing shoes is the classic Cross-on-Cross. Its popularity lies in the simplicity and uncomplicated interweaving of laces. I think this method will “rule the ball” for a long time to come. Well, we will try to learn something new and find out how to tie shoelaces beautifully. For example, lace up shoes with the Direct method or the Cross over under. Both methods are quite simple and only a little more complicated than the classic Cross-on-Cross.

Next, we will learn how to tie shoelaces with the Diagonal method. This method allows you to lace up shoes both the same and mirror on both shoes. Do you like minimalism? Then you can lace up your shoes with the Reverse Method (also called Military Lacing), where there are almost no laces. And the hardest way to tie shoelaces is with the Lattice.

They say shoes make a man. In this case, an interesting lacing will tell a little more about you.

Method 1. Cross-to-cross lacing

Every child knows the traditional way of lacing Cross-to-Cross shoes. It is simple, functional and versatile enough. If you are a practical person, this is the best choice for you. The method is time-tested and will suit any men's classic shoes.

How to tie shoelaces with the Cross-on-Cross method:

  1. The lace is passed through the lower holes of the shoe from the inside and is brought out from both sides. It is important that the laces at this stage are the same length.
  2. Take one end of the string and pass it through the next empty opposite hole.
  3. Repeat the operation with the second cord. You should get a crosshair laces.
  4. Continue this straightforward operation to the topmost holes.

Method 2. Diagonal lacing

The diagonal method of lacing men's shoes looks fresh and attractive. After both shoes are laced, a rather interesting diagonal pattern is obtained. It can be either the same or mirrored on a pair of shoes.

How to tie shoelaces with the Diagonal method:

  1. Pass the lace through the bottom holes on one side from the inside and the other from the outside. The side that has passed from the inside will be visible on your boot, while the other will not. It is important that the laces at this stage are the same length.
  2. Next, take the end that will be visible and thread it to the next, opposite side so that the end comes in from the outside rather than the inside.
  3. Pass the other end (which will not be visible) through the next opposite hole from the inside. Please note that at this step, the side that was not visible will be outside the boot.
  4. Continue the operation to the upper holes, alternating the visible and not visible side of the lace.

How to tie shoelaces

Recently, lacing is gaining more and more popularity “in European style”. This is a strong and reliable lacing, it is also used by the military, lacing shoes. The European method allows you to create two drawings at once. The top layer is classic straight lines, and underneath is a zigzag made of laces. Tying shoelaces “European-style” for the first time will be a little difficult. It’s best to practice with your boot off. We put the boot toe to ourselves. Pass the lace into the lowest holes from the outside inward. Pass the right end of the lace into the second hole from below (on the left side), then draw it into the opposite hole (on the right side), then the fourth from the bottom left, then the opposite hole and the sixth from the inside out.Draw the left end of the lace under the right and lead from the inside out through the third hole (on the right side), then thread it from the inside out to the opposite hole on the left. Repeat the same process with the three remaining loops.

Method 4. Straight lacing

Direct lacing allows you to lace up your shoes with parallel lines that look quite unusual on any classic shoe. On the one hand, laced shoes look “easy”; on the other hand, it looks attractive. The direct method is interesting with any number of lace holes. The only inconvenience is the difficulty of tightening the shoelaces, especially if the shoes fit tightly on the foot.

How to tie shoelaces Direct method:

  1. Thread the cord from the outside, so that both ends extend inward. It is important that the laces at this stage are the same length.
  2. Take the left cord in your hand and pass it from the inside out to the next hole on the same side of the row of holes.
  3. Take the right lace in your hand and pass through 1 hole from the inside out to the same row.
  4. Next, take the left cord in your hand and thread it from top to bottom in a strictly parallel hole in the next row.
  5. Take the right lace and repeat the same action as in the previous step. You should get 3 parallel lines that are formed by laces.
  6. All other holes must be laced exactly in the said sequence until you reach the last row.

Method 5. Reverse or Military Lacing

If you like minimalism in all its manifestations, then I can recommend you lace up your shoes with the Reverse or Military method. The last name, this method of lacing received due to its practical application in many armies of the EU countries.

How to tie shoelaces with the Reverse or Military method:

  1. Thread the cord from the outside, so that both ends extend inward. It is important that the laces at this stage are the same length.
  2. Cross both ends of the lace and thread from the inside out to the next empty holes. It should make an invisible cross.
  3. Next, take the left end and thread into the next hole in the same row from top to inside.
  4. Do the same operation with the second end.
  5. Then cross the laces and thread them into the next opposite empty holes to make an invisible cross.
  6. Repeat steps 3 and 4.

Continue lacing your shoes until you reach the upper holes.

Method 6. Lattice

The last method that we will consider is the most difficult. However, if you have the patience, you will get a very unusual pattern that many people will like. Please note that the grill lacing looks best on shoes with 6 holes.

How to tie shoelaces using the Grid method:

If you have 4 holes:

  1. Pass the cord from the inside, so that both ends extend outward from the inside. It is important that the laces at this stage are the same length.
  2. The final step will be to thread both ends from the inside out into the last holes, after crossing the ends first.

If you have 5 holes:

  1. Pass the cord from the inside, so that both ends extend outward from the inside. It is important that the laces at this stage are the same length.
  2. Cross both ends of the lace and thread from the top inward through one empty hole.
  3. Next, take one of the laces and pass through the hole that was missed in the 2nd step from the inside and pull it out.
  4. Repeat step # 3 with the second hole in the lace.
  5. Thread the ends from the outside to the inside.
  6. Take the left end and thread into the next hole in the same row from the inside out

At the time of lacing, try to weave the ends in the form of a "lattice", according to the principle: once from above, once from below .... one time from above, one from below.

  1. Pass the cord from the inside, so that both ends extend outward from the inside. It is important that the laces at this stage are the same length.
  2. Cross both ends of the lace and thread from the top inward through the two empty holes.
  3. Take the left end and thread into the next hole in the same row from the inside out.
  4. Repeat the previous step with the second end.
  5. Take the left end and thread into the second (empty) opposite hole that was skipped in step 2.
  6. Repeat the previous step with the second end in mirror image.
  7. Take the left end and thread into the next hole (the third from the bottom) in the same row from the inside out.
  8. Repeat the previous step with the second end.
  9. Thread both ends from the inside out to the last upper holes.

Rectangular method of lacing on shoes

Making neat, straight lacing lines is easy! Master the “rectangular” method of lacing shoes in which there are no diagonal crosshairs. The first holes are closed in the same way as in the first method. Then, the right lace is inserted into the second hole from the bottom to the right, from the top to the left from the left, then to the fourth from the left side and into the fourth from the right side and out through the sixth hole to the right. In the same way, the remaining “strokes” are filled.

How to hide a node (top left)

Another way to lace up shoes

This option requires a lot more attention and patience, but the result will truly decorate your shoes. First, the lace must be inserted into the lower holes from the inside out. Pull the left end down (to the toe) and pass under the strip of lace between the holes, then pass into the second hole on the right side from the inside out. Then draw an end under the line you just made. Next, you need to thread the lace in the same way into the third hole on the left side and the fourth on the right, then in the fifth on the left and in the sixth on the right side. The second end must be drawn in the same way, alternately drawing under the previous line and above it.

Sneakers are a unique sports shoe in which everything is thought out to the smallest detail: a durable and elastic sole, a breathable upper, comfortable insole that adds comfort during operation, a stable back, reliable laces, a stylish design. Do you know how to lace up sneakers to make them look even more interesting?

Features of shoe laces

Perhaps for some, the lace will not seem to be the most important element of the shoe, however, it is difficult to do without it. This detail appeared at the beginning of the last century; before that, all kinds of buttons and buckles were used as fasteners. Shoelaces are called fixed lengths of ropes made of natural or synthetic materials. Special metal, plastic or silicone lugs located on both sides not only facilitate the lacing process, but also protect the lace from tearing. A tightly tightened and tied lace reliably fixes the foot, it is worth loosening or untying it - the leg easily leaves the shoes.

Techniques and types of lacing sneakers

Surely many cannot even imagine how many various options for tying shoelaces exist today: from the usual versions to the most intricate weaving. By the way, these methods of lacing sneakers are suitable for any shoe with similar clasps. An original way of threading through holes, twisting together, tying knots and bows will allow a person to stand out and attract attention. Consider the most popular types of tying shoelaces on sneakers, their advantages and disadvantages.

Cross method

This method is not in vain called the classic, because it is the most common and convenient. Even a small child can perform light zigzag lacing. It is this simple option for tying shoelaces that parents and kindergarten teachers teach children.

The process begins from the bottom: the string is passed from the inside through the lower holes, brought out, crossed, and then carry out similar movements with the second pair of holes.The steps are repeated until the shoes are completely tied. The lace tied in this way is almost outside, so it does not rub your feet at all. A small minus is the crushing of the sneakers.

Kind of cross method

The difference between this method and the previous one is that the laces are inserted into the holes from top to bottom, crossed inside, then brought out, where they cross again. The advantages of this option are speed, lightness, as well as reduced wear. However, it is worth considering that this method is suitable for shoes with a pair of holes. Otherwise, the upper ends will be directed inside the shoe, which will cause inconvenience when tying.

European lacing

This method is also called tying a ladder. The technique is slightly different from the previous ones, although no less simple and fast.

  • through the lower holes the string is brought out,
  • one (for example, left) end is threaded crosswise and brought out through an opening on the opposite side,
  • another (right) - withdraw in the same way only bypassing one hole,
  • repeat until fully set.

The advantages of the European version are that the shoes laced in this way fit snugly enough to the foot, the tying process is fast, the lacing has a neat appearance. When getting a leg injury, when it is important to quickly remove shoes, the laces tied with this method are very easy to cut. Minus: if the distance between the holes is large enough, attractiveness is lost.

Rectangular or straight lacing

Fashionable direct lacing of sneakers is applicable for shoes with an even number of pairs of holes. A feature is the absence of diagonal lacing inside the shoe.

  • the lace is pulled inside the lower holes,
  • the right end is lifted from the inside of the shoe, threaded first into the right, then the left hole,
  • the left part of the lace is led out similarly, bypassing only one hole,
  • the procedure is repeated until the shoes are completely tied.

There is also a lightweight version of straight lacing:

  • the lace is inserted in through the holes below,
  • the left end is lifted up inside the shoe, pulled first through the left, then into the right hole,
  • the same part of the lacing is brought out through the right hole, and then stretched inside the left,
  • further similarly to the very top,
  • the second part of the lacing is lifted up, brought out through the last hole,
  • It remains only to adjust the length of the laces.

If the sneakers have 5 holes on each side, this method can be slightly modified. For example, skip the bottom pair of holes, cross stitch in any part, make one diagonal coupler or double stitch on the second pair of holes.

Hidden Node Method

The hidden knot will allow you to lace up the sneakers beautifully and neatly, hiding the ends inside the shoe. In addition to external attractiveness, this method has its drawbacks. Firstly, it is suitable for shoes with a pair of holes, secondly, it can be difficult to tie a knot directly, and thirdly, the seal obtained inside the shoe often causes discomfort. The technique is similar to the rectangular method of lacing, with the only difference being that one end is made shorter than the second. At the end of tying, both parts of the laces go inside the boot. The peculiarity of the method is that the left side is left un-laced, while the right side is completely laced. The final touch is the binding of both parts on the left side of the shoe.

Lacing for the thicket

For those who are going on a trip, it is important to choose a method that guarantees good tightness of shoes:

  • the lace is passed from the inside out
  • the left end is pulled into the upper hole, then into what is on the right side,
  • both laces are lifted upward, stretching inward through one hole, then brought to the opposite side and pulled higher,
  • the end result - both ends are on the same side, where they are tied in a knot.

Although outwardly this method does not look very attractive, it will help prevent clinging to snags, branches and other obstacles.


  • Both edges after the first row are displayed up.
  • Then they are twisted with each other 2-3 times or tied in any interesting way.
  • Then the ends diverge in different directions and are again brought out.

This way is not the easiest, but it looks impressive and holds tight .

Roman way

This option looks very aesthetically pleasing, but it can be difficult to tighten.

  • the lace is pulled through the left hole, lifted vertically, removed from the hole above
  • the upper end is inserted into the lower hole on the right side, the lower - in the upper,
  • the lower part of the lace is pulled up two holes up, then on the opposite side, again up one level,
  • the second end - immediately two levels up, bypassing one hole,
  • the crossed ends are raised one level higher and tied into a knot.


For those who want to lace up cool sneakers, tying like a ladder is suitable. Although this option is somewhat complicated, and it is not easy to tighten the laces, but the shoes look very beautiful and unusual. This method is especially suitable for tall models or shoes with too long laces.

To tie the shoelaces with a “ladder” it is important to follow this chain of actions:

  • laces lead from the inside out
  • the ends are lifted and pulled into the upper holes,
  • cross each other, pass under vertical sections,
  • raise a step up, stretch into the holes, then cross again,
  • actions are repeated to the very top of the sneaker.


How to lace up sneakers if the ties are too short? There is a way out - this is a simple and at the same time unusual version of a butterfly.

The sequence of actions is as follows:

  • the lace is passed inside the shoe
  • inside they stretch vertically, then bring it out,
  • after crossing, the ends are pushed into the next pair of holes,
  • repeat the action to the top of the shoe.

With an odd number of pairs of holes, the lacing ends with the crossing of the shoelaces, with an even number it comes out without intersecting.

Double helix

The spiral method starts, as usual, from below:

  • the lace comes out of the left hole, enters the right one,
  • further actions are carried out similarly: the left part is inserted into the right hole, the right part comes out of the left.

The advantages of this technique are obvious: external attractiveness, speed and ease of the process, reduced lace wear and the ability to tighten simultaneously with two parts of the lace. Tying the sneakers in a mirrored form will emphasize the symmetry of the spiral and give the sneakers a spectacular effect.


This method creates at each level another node, forming a sufficiently strong contraction, which is very difficult to loosen.

  • the lace is pulled from the inside through the lower holes,
  • tie the ends of the lace, part in different directions,
  • withdraw similarly to the first row: from the inside out,
  • repeat until the shoe is completely tied.

Methods for tying shoes with a different number of holes

4-hole shoes somewhat limit the ability to create unusual patterns. Most often, lacing sneakers with 4 holes - this is tying a cross outward or in the form of even stripes. Both methods (described above), although they are not considered complex, look quite decent on shoes.

The most common are sneakers with 5 holes. Here you can experiment with many options, or you can focus on the technique of "Knot or loopback". The peculiarity of this method is that the laces do not intersect, but are elegantly intertwined in the center.

Steep and effective lacing in the form of a lattice or a web is suitable for sports shoes with 6 holes. The ties, intersecting each other, form an acute angle.If you use not very thick multi-colored laces, such a lacing will become even more spectacular. The disadvantage is the complexity of the process and the difficulty of tightening.

Sometimes, to transform your old, slightly annoyed sneakers, it is enough just to change the laces and the way they are tied. The choice of lacing option depends on the individual preferences of each person. The main thing is that the chosen scheme contributes to reliable fixation of shoes, tight tightening of both halves. An important condition is human comfort: it is not necessary either to pinch or loosen too much, knots to be knotted tightly, avoiding untying during movement.

Sneakers are a unique sports shoe in which everything is thought out to the smallest detail: a durable and elastic sole, a breathable upper, comfortable insole that adds comfort during operation, a stable back, reliable laces, a stylish design. Do you know how to lace up sneakers to make them look even more interesting?

Double reverse

Pass both ends through the hinges. Cross each other and fasten on the next row. Next, let each end on the same side through two loops and cross again.

Shoelaces can act not only as a fixing element, but also become the main decorative component of the image. Someone, in order to achieve such a goal, buys options that are contrasting with respect to the main color palette of shoes. Others take on unusual methods of lacing. So,

There are so many ways. Consider the most interesting. And to begin with, it is worth repeating the most elementary and common type of tying.

Traditional lacing method

The lace is threaded into the 2 lower holes, brought up (inserted from the bottom, brought up). Then its ends cross and repeat the movements from the very beginning (the ends always go from bottom to top). The advantages of this technique are obvious: the usual sequence of actions takes a minimum of time, and the resulting pattern is not broken after adjusting the braiding tension in the upper or lower part. In addition, this option tightens the boot, but the leg does not suffer with the right approach.

There is only one drawback of the method: everyday. The “grayness" of the bow is quite fixable, you just have to make a little effort and use more unconventional lacing options.

No bow

Method number 1 . Hidden knot suitable for short strings:

Important! In this method, you need to screw from the inside.

Method No. 2 . Display:

  • we pass the lace through the holes so that the tips come out from the bottom,
  • the left goes into the 2 right hole, then into the 4 left, 6 right, etc. (we go up only through even holes, not going to odd ones),
  • the right one is threaded into odd holes,
  • after threading into the last pair of holes, the laces will be under the tongue, tie them there with a knot.

Cyclist lacing

The node is located on the side, due to which it is more secure. There is less chance that the laces will untie and wrap on pedals. Algorithm of actions:

The bow itself will turn upside down, vertical, and not horizontal. In this pattern in the central part of the shoe, above the tongue, the laces will not cross. On the sides, you get “strokes” crawling on top of each other. It looks beautiful only with a large number of holes . That is, this technique is intended primarily for shoes with a high boot.

Spider web

Shoes with a wide tongue and thick laces (you can use flat ones) are best suited for this method. Sometimes the method is called differently, its second and third name is the "world wide web" and "network". Step-by-step recommendations for lacing:


To begin with, it is worth counting the number of holes on one side. If an odd number comes out, then the first "stitch" should go on top, if even - down . Then the laces, without crossing each other, are threaded into the second row (half of the boot closed from the eyes).After they cross.

This pattern is repeated until the last 2 holes. Having passed the tips in them, start knitting a bow.


Pass from the outside to the inside so that both ends face the inside of the shoe. Make sure that both right and left laces are equal in length . Then cross them, and then pass from the inside up to the second row of holes. The result should be a cross hidden from the eyes.

By rail

Hangs from the bottom up. Then comes the vertical “stitch” (the left end goes to the left second hole, the right to 2 right). Then the ends intersect and the left lace again falls into the second right hole, and the right one into the 2 left one. After that comes the vertical “stitch” again, crossing and re-threading into the same hole.

Important! This the method is absolutely not suitable for thick and flat strings . It only works with very thin, but durable. The latter quality is also necessary, since weaving requires tension and constant pulling of the ends, their alignment.


Pull from top to bottom (the ends will go into the inside of the shoes, closed from the eyes). Send the left end to the 3 right hole (count from the bottom). Then in the left 3. And so in a circle (odd holes - for this tip, you do not need to touch even holes). The right lacing thread into all remaining holes.

Economical grill

Option number 1 . If 4 holes:

Pass on the inside. The tips will look up, not down, to the shoes. Cross. Insert into the last 2 top holes. Send down. Pass through the first lower pair of holes. Then repeat the movement from top to bottom, just each time a little back down closer to the middle.

Method number 2 . For 6 holes:

Zip zip

This method is based on a traditional technique. The only difference from her is that after inserting the end into the hole, a circular loop is made . The name was given to him by the usual zipper (weaving remotely resembles it).

A way for riders

Main feature - the knot is located not in the upper part of the boot, but in the middle . With very long boots, such a lacing looks interesting, but only if the lace is correctly tensioned. Strongly tighten and tighten is not necessary. And do not forget to stock up on very long strings. Short ones simply will not meet each other due to weak weaving tension.

Push from top to bottom (the tips will go towards the shoe). Send the left lace into the upper right hole. Walk them to the middle of the leg. Right move towards the left. Tie a bow in the middle.

Important! In this lacing you can get a bow on the side. To do this, simply re-insert the laces into the hole located on top of the one from which the second end comes out.

One of the most common everyday types of shoes are sneakers. In the modern world they are used not only for jogging, but also for walking on impassable roads, wearing at work.

And to make your appearance more original and unusual, the main detail of the sneakers will help - lacing. In order to beautifully tie the shoelaces on sneakers, you do not need to pay much attention to this, but simply study the photo diagrams on how to tie the shoelaces without much effort.

Easy and fast method in a special way to lace up sneakers. It will look good on summer type shoes.

Thread holes in the bottom row with a lace. We take it out of the hole and lift it out in the next row. We cross the cords and stick in the next opposite row.

Pass through, skip one section and cross again. We continue in the same spirit until we reach the top.

Hidden Lacing

The name speaks for itself, namely, that its main feature is the masking of unnecessary parts, nodes. On the front part, only harmonious lines are visible.

Insert one end of the lace into the hole and into the parallel hole the other end. On the inside of the shoe we skip a row, then again we pierce the lace into the hole.

Repeat these manipulations until the holes end. All flaws will be from the inside.

Lacing "Lightning"

This method of lacing will make you sweat pretty. To achieve an effective result, you need to do everything according to the instructions.

Such a beautiful lacing will draw the attention of others. It is well suited for shoes, which requires a good fixation of the legs (skates).

We begin lacing by inserting it from the inside out into the lace hole. Make a cross loop. Having made one row in this way, we continue to manipulate. End with a loop on the inside.

Lattice Lacing

It looks very impressive and unusual on sports-type shoes. But it can only be done on shoes with six holes. Thread the lace into each hole, then twist and thread through the holes on the other side.

The figure should resemble a grid. Can be used with multi-colored laces. This is not the easiest kind of lacing.

Web Lacing

Suitable for shoes with a large tongue and executed with wide laces.

There are two ways of this lacing:

Insert the shoelaces in the bottom row from the inside out. Insert the edges of the shoelaces into the opposite holes, make a pass of 2 rows. We stick the edges into the holes of the adjacent row, skip the row. Tying shoelaces we penetrate through the formed lines.

We also thread the laces in the bottom row from the inside out. We cross the laces and stick them into the holes, making a pass in 2 rows. Insert the edges of the laces into the eyelets in the same row. Cross the laces, put them in the holes of another row. Then put the string into the hole that is in the row above. For more information on how to tie shoelaces beautifully, consider the photo.

Looks harmonious on sneakers with six holes.

Lacing with just one hand

If you think that tying shoelaces with a bow is no longer relevant, then this type of lacing is for you. For her, you should make only one knot at the end. All attention should be focused on the upper part of the lacing, below the lacing should be free.

We begin to thread the lace into each hole when you reach the end, tie a knot, and repeat the same manipulations, on the other hand. This lacing will look beautiful on shoes with a large number of holes, but a small size.

Lacing is the other way around

This lacing is suitable for very long laces to shorten them and make them more comfortable for everyday wear.

We stretch the lace on top, make zigzag movements in three holes. At the moment when the lace is threaded into the penultimate hole, we pull them into the last hole and pull them from the neighboring side.

Summing up the above, we can conclude that lacing is not the last place in the decoration of shoes. She also solves the problem of long shoelaces, well fixes the foot in shoes.

Lacing makes the shoes unusual, bright and original.

What type of lacing to choose depends on you and your character, but it is better to study and try everything. After all, a new creative lacing will update your shoes and look.

How to lace up your shoe laces

We all want to stand out among the crowd and show our excellent style and taste. To do this, it is not necessary to dye your hair green, or in any other way radically change your appearance. In this matter, your individual self and creativity are important.

A variety of ideas and opinions on lacing sneakers

Even if such ideas are not yet available, we can throw one original. Pay your attention to shoes, in particular - sneakers. How do you know how to tie laces on sneakers? But you, without thinking twice, will say that those that your mother taught.If you are intrigued by this question, go online and ask him “how to lace up your sneakers,” and you will see a different number of lacing methods offered by sites. Why such a discrepancy? The fact is that everyone’s shoes are different, and the number of holes can be multiple and non-multiple.

Lacing 6-hole sneakers has many options. For freedom of movement, lace up so that 1-2 holes remain free. This method is suitable if the purchased new shoes were somewhat small. In the opposite case, it is worth tightening your laces so as not to lose your sneakers while running.

When buying sports shoes, we must pay attention to the fact that the model does not always fit perfectly on the foot. But if you know how to lace up sneakers of any kind, then you can safely choose any model of sneakers that you like and adjust the wearing comfort using laces. Some of the methods below are also used to lace up 5-hole sneakers.

So, here is a list of the original laces that people came up with for different types of shoes:

And for those who do not rush, we offer the following methods of tying shoelaces on sneakers beautifully.

Direct European lacing with a short flight of stairs. In this case, one string enters the bottom holes and comes out on both sides. Then one end crosses out through the top hole, and the other crosses up through one hole.

Straight lacing is very popular. A diagonal crosshair is missing and half the length of the lace is hidden inside. Such a lacing is possible for sneakers with six holes, but with five it will not work.

Lacing for the thicket is the opposite of a straight line. Provides greater tightness sneakers. Very practical for those who like to walk in impassable forests.

Roman lacing is very original, since the pattern is not solid, but torn.

Lacing along the long diagonal is for those who have nowhere to put their long laces.

Window (store) lacing - similar to the usual cross, but at the same time the ends are hidden, and it seems as if they are completely gone.

Lacing with a ladder - it looks neat and attractive. To lace up your sneakers in this way, you need very long laces.

Butterfly lacing - for short laces. At the same time, crossings are visible from the outside, and inside the laces go vertically and are hidden inside.

Knotty lacing - very original. At each crossing of the ends of the lace, they are intertwined two to three times.

Lacing with a double cross using a ligature is very intricate. And she needs sturdy laces. First, the lace through the lower holes inward, then two pairs of holes are left unused. The holes go into the fourth pair. Then they make a crossing and insert the ends into the third holes. Then lacing is done according to this scheme to the very end.

The twisted and twisted types of lacing are distinguished by the fact that there are no intersections of the ends, but they are intertwined in the middle.

Watch the video: How to Lace Your Sneakers Three Different Ways: The Ultimate Guide (February 2020).

Leave Your Comment